BARDAHL B2 engine oil additive "The classic" - 300 ml can
TOP
-33%
BARDAHL B2 - the classic engine oil additive has been on the market since 1939 and has proven itself particularly in older engines. One of our bestsellers for years! Now in even better quality!
BARDAHL B2 - the classic engine oil additive has been on the market since 1939 and has proven itself particularly in older engines. One of our bestsellers for years!
New, stronger quality: Add 1 can to up to 6 liters of engine oil.
ATTENTION:
Your advantages:
BARDAHL B2 - the classic engine oil additive has been on the market since 1939 and has proven itself particularly in older engines. One of our bestsellers for years!
- It ensures smoother engine running, less metallic noise, lower oil consumption and regenerates rubber seals.
- The special adhesive properties of BARDAHL polarplus ensure a thicker, more stable oil film, which ensures reliable protection of the metal surfaces even during longer periods of downtime (e.g. winter storage).
- This adhesive properties also ensure that an oil film always remains in the hydraulic tappets, which prevents premature wear and reduces the annoying "clicking" when the engine is cold.
New, stronger quality: Add 1 can to up to 6 liters of engine oil.
ATTENTION:
- Very high product viscosity! The product should be at least 20°C warm and added to a WARM engine. Then let the engine run for about 3 minutes without load.
- Do not use on wet clutches that run in the same oil bath! The friction value will be reduced too much and the clutch will slip.
Your advantages:
- Wear protection: BARDAHL polarplus
- very good corrosion protection
- very good adhesion thanks to exclusive BARDAHL additive
- very good valve protection, even for hydraulic tappets
- suitable for all engine oils - including synthetic ones
- reduces oil consumption
- suitable for wet clutches: no, the coefficient of friction is reduced too much (= wear protection!)
Alfa Romeo
- ...
FIAT
- ...
Lancia
- ...
VW
- GOLF 1.8 GTI (82 KW) (1982-1983), MOTOR DX
Füllmenge (gesamt): 3,5 Liter, Filterkapazität: 0,5 Liter
Ole BARDAHL, der Firmengründer, erfand in den 1930er Jahren die Additivtechnologie zur Verbessereung der damals noch sehr einfachen Schmieröle. Sie bekam den Namen BARDAHL POLAR PLUS und wird seither ständig weiter entwickelt. Mit der Einbindung der bahnbrechenden FULLERENE(R)-C60-Technologie aus der Nanotechnik entstanden in den letzten Jahren die High-Tech-Öle und -Additive mit BARDAHL FULLERENE(R)-C60 polarplus.
Klassiker wie BARDAHL B2 werden seit 1939 produziert!
