Coilover suspension V1 (VA spring struts in exchange!, 10220914), BMW E30 with ABS!
-26%
- Tested lowering in mm: Front axle: 60-80 mm / Rear axle: 55-80 mm
- Individual lowering
- Rebound Rebound
- Compression (Low) Compression (Low)
- Composite spring plate Composite spring plate
- Trapezoidal thread Trapezoidal thread
- INOX LINE INOX LINE
- Expansion tank expansion tank
- 7-Post checked 7-Post checked
- Parts report Parts report
KW V1 coilover kit
Sportiness and outstanding looks.
With factory-set damping.
The KW V1 coilover suspension is the ideal entry-level system for customers who want to determine the maximum technically possible or individual lowering themselves. In extensive driving tests, our experienced engineers developed a setup tailored to the target group by determining the optimal balance of sportiness, comfort and safety and implementing it directly into series production.
Setup – factory pre-configured damping setup
The KW V1 coilover suspension has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimal balance of sportiness and everyday suitability when driving. Even with a full load and maximum axle loads, the dampers always work with a sporty characteristic curve.
Continuous lowering
The KW V1 coilover suspension enables maximum or individual lowering within the tested setting range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.
The benchmark for coilovers
As with all KW coilovers, KW's engineers develop the vehicle-specific KW damper set-up, which is valued by car enthusiasts worldwide, in extensive test cycles on the Nürburgring Nordschleife and in our test center on the KW 7-post driving dynamics test bench. With a KW coilover suspension you can experience your car more directly and dynamically.
After all, you are not buying just any coilover kit, but a KW coilover kit that has been specially developed and tailored to your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as large-scale manufacturers. With the KW V1, the rolling and pitching movements of the vehicle body are reduced during compression, meaning you benefit from genuine directness and sportier handling when driving.
Every KW coilover kit is subjected to extensive stress tests during production and is developed and manufactured directly at our headquarters in Fichtenberg, Swabia, in order to meet the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to guarantee a multi-year guarantee on our KW coilover suspensions, which exceed the original equipment manufacturer quality and suspension solutions that cover over 4,600 applications. When installed by one of our KW specialist dealer partners, it lasts up to five years.
Sportiness and outstanding looks.
With factory-set damping.
The KW V1 coilover suspension is the ideal entry-level system for customers who want to determine the maximum technically possible or individual lowering themselves. In extensive driving tests, our experienced engineers developed a setup tailored to the target group by determining the optimal balance of sportiness, comfort and safety and implementing it directly into series production.
Setup – factory pre-configured damping setup
The KW V1 coilover suspension has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimal balance of sportiness and everyday suitability when driving. Even with a full load and maximum axle loads, the dampers always work with a sporty characteristic curve.
Continuous lowering
The KW V1 coilover suspension enables maximum or individual lowering within the tested setting range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.
The benchmark for coilovers
As with all KW coilovers, KW's engineers develop the vehicle-specific KW damper set-up, which is valued by car enthusiasts worldwide, in extensive test cycles on the Nürburgring Nordschleife and in our test center on the KW 7-post driving dynamics test bench. With a KW coilover suspension you can experience your car more directly and dynamically.
After all, you are not buying just any coilover kit, but a KW coilover kit that has been specially developed and tailored to your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as large-scale manufacturers. With the KW V1, the rolling and pitching movements of the vehicle body are reduced during compression, meaning you benefit from genuine directness and sportier handling when driving.
Every KW coilover kit is subjected to extensive stress tests during production and is developed and manufactured directly at our headquarters in Fichtenberg, Swabia, in order to meet the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to guarantee a multi-year guarantee on our KW coilover suspensions, which exceed the original equipment manufacturer quality and suspension solutions that cover over 4,600 applications. When installed by one of our KW specialist dealer partners, it lasts up to five years.
BMW
- 3-series / 3-series (E30); (3/1, 3/R), 11.`82 -, power(s): 55-151 kW
Lim., Touring, Convertible; rear-wheel drive; Axle load front: -865 kg / rear: -1030 kg
Strut housing diameter 51mm with ABS;
- VA + RA height adjustable (VA threaded spring struts, RA springs with height adjustment + dampers)
- When used with standard wheel/tire combinations, additional commercially available wheel spacers may be required as accessories
- The outside diameter of the suspension strut stand tube must be measured (45mm or 51 mm). You must also check whether the vehicle is equipped with ABS.
- Original shock absorbers must be sent in in advance for processing
- Chassis with suspension strut conversions (replacement suspension struts) are only available in a galvanized version.
- Brand: KW
- Product: coilover kit
- Version: V1
- Material: galvanized steel
- Approval: parts report (§19.3)
- Front axle load: -865 kg
- Rear axle load: -1030kg
- Scope of delivery: Set of VA threaded spring struts (in exchange), HA springs with height adjustment + damper
- Short name: Coilover suspension V1 (VA spring struts in exchange)
- Year of construction11/1982-
- Diameter VA: Ø 51 mm
- Setup: Sport
- Lowering front/rear (mm): 60-80 mm / 55-80 mm
- Restriction (Product): For vehicles with ABS
- Front shock absorbers in exchange (original VA shock absorbers must be sent in advance)
- Product line: Street Performance
- Claim: tuning
- Date of first report: December 10, 1997
- Front adjustment: thread
- Rear adjustment: thread
- Hardness adjustment: none
KW - made for winners!KW automotive GmbH has been known for its premium products in the area of car tuning and vehicle refinement for years. The company offers its customers the largest range of coilovers. The entire range - from springs to sports suspensions to the "inox-line" coilovers in three damping variants - is unrivaled on the market in terms of diversity.