Cross-drilled rear sport brake discs, Ø 226.0 x 10 mm (600.1599.52), Seat / VW
-19%
Ø 226 x 10 mm, 4/4, 4 x 100, solid, cross-drilled
Hole pattern/number of holes: 4/4
Supplementary article/supplementary information: without wheel bearing / without ABS sensor ring
Outer diameter: Ø 226 mm
Wheel hub diameter 1: Ø 40 mm
Wheel hub diameter 2: Ø 50 mm
Surface: coated
Number of holes on the rim: 4
Bolt circle diameter: 100 mm
Test mark: KBA 60934
Height: 72 mm
Brake disc thickness: 10 mm
Brake disc type: fully perforated
Minimum thickness: 8 mm
Hole pattern/number of holes: 4/4
Supplementary article/supplementary information: without wheel bearing / without ABS sensor ring
Outer diameter: Ø 226 mm
Wheel hub diameter 1: Ø 40 mm
Wheel hub diameter 2: Ø 50 mm
Surface: coated
Number of holes on the rim: 4
Bolt circle diameter: 100 mm
Test mark: KBA 60934
Height: 72 mm
Brake disc thickness: 10 mm
Brake disc type: fully perforated
Minimum thickness: 8 mm
Seat
- Cordoba I Limousine (6K1, 6K2) ( 02.1993 - 10.2002 , 110 - 150 PS)
- Cordoba I Vario (6K5) ( 07.1997 - 12.2002 , 110 PS)
- Cordoba I Vario Kasten / Kombi (6K5) ( 08.2000 - 12.2002 , 110 PS)
- Toledo I Schrägheck (1L) ( 05.1991 - 03.1999 , 64 - 150 PS)
- Ibiza II (6K1) ( 03.1993 - 02.2002 , 110 - 129 PS)
VW
- Corrado (53i) ( 09.1988 - 12.1995 , 115 - 160 PS)
- Golf II Schrägheck (19E, 1G1) ( 08.1983 - 10.1991 , 84 - 160 PS)
- Golf III Cabrio (1E7) ( 07.1993 - 05.1998 , 75 - 115 PS)
- Golf III Schrägheck (1H1) ( 11.1991 - 09.1997 , 75 - 110 PS)
- Golf IV Cabrio (1E) ( 06.1998 - 06.2002 , 75 - 115 PS)
- Jetta II (19E, 1G2, 165) ( 01.1984 - 10.1991 , 84 - 140 PS)
- Passat B2 Schrägheck (32B) ( 01.1985 - 03.1988 , 136 PS)
- Passat B3/B4 Limousine (3A2, 35i) ( 04.1988 - 08.1996 , 90 - 136 PS)
- Passat B2 Variant (33B) ( 01.1985 - 03.1988 , 136 PS)
- Passat B3/B4 Variant (3A5, 35i) ( 04.1988 - 05.1997 , 90 - 139 PS)
- Polo III Schrägheck (6N1) ( 04.1996 - 10.1999 , 100 - 120 PS)
- Polo III Classic (6V2) ( 06.1998 - 01.2002 , 110 PS)
- Scirocco II (53B) ( 10.1985 - 07.1992 , 129 - 139 PS)
- Vento (1H2) ( 11.1991 - 09.1998 , 90 - 115 PS)
VW
- 191 615 601 B
- 357 615 601
- 6N0 615 601
- ...
Zimmermann embodies braking expertise, from which you benefit!
Standard brake discs
Standard brake discs from Zimmermann include an extensive product range with over 1,000 different references, many of which already feature the anti-corrosion coating Coat Z. Zimmermann has over 50 years of experience in brake disc manufacturing and development.
Sport brake discs
The perforated sport brake discs offered by Zimmermann offer improved wet braking performance, brake dust and water are continuously removed, a sportier look, and a noticeable improvement in your vehicle's braking performance. The vehicle's appearance and brake fade are avoided.
Coat Z Brake Discs
Coat Z brake discs are characterized by little to no rust formation in the brake cup area, resulting in a significantly improved appearance. Full braking performance is still achieved without prior removal of the coating.
Formula Z Brake Discs
The Zimmermann Formula Z brake disc was designed with the goal of achieving optimal braking performance under high mechanical and thermal loads with easy installation. A direct replacement of the original disc is possible.