- for all vehicle types
- quick hardening
- high-modulus
- antenna-compatible
- low conductivity
- good adhesion to residual material
- ready to drive quickly
Clean and degrease adhesive surfaces thoroughly with PETEC cleaning cloth (item no. 82111) or PETEC Multi Cleaner (item no. 82100 or 82200). Then apply PETEC Multiaktiv Primer Kombistick (item no. 82410) evenly in one direction to the adhesive surface of the window. Open the window adhesive cartridge, apply the nozzle and discard the first 2cm of the adhesive. Apply the window adhesive to the adhesive surface in the form of a triangular bead using an ejector gun.
Observe the vehicle manufacturer's information on the bead geometry and assembly. Observe the installation instructions, safety and technical data sheet! (Download the PETEC installation instructions, data sheets and application video at www.petec.de)
Our application-technical advice in word, writing and through tests is based on our current state of knowledge. However, it does not release you from your own testing of the products we supply for their suitability for the intended processes and purposes. Application, use and processing of the products are outside of our control and are therefore solely your responsibility.
Container type: cartridge
Contents: 310 ml
Unit of quantity: milliliters
Processing time: 20 min.
Tensile strength: 7.5
Chemical properties: hardening high-modulus
Signal word: Danger
Contains: 4,4'-methylenediphenyl diisocyanate
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H412: Harmful to aquatic life with long lasting effects.
EUH204: Contains isocyanates. May produce an allergic reaction.
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P284: [In case of inadequate ventilation] wear respiratory protection.
P304 + P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P342 + P311: If respiratory symptoms occur: Call a POISON CENTER/doctor.
P501: Dispose of contents/container in accordance with local/national regulations.
PETEC is a medium-sized, modern and future-oriented company based in Schlüsselfeld in Upper Franconia. Our extensive range of chemical-technical products enables our customers to use them perfectly and professionally.
Since our company was founded in 1991, quality awareness and continuous innovation processes have been the key to successful development on the market.